Lifting System for Flat Anchors
Two hole anchor
*MWL : maximum working load
Anchors are in black carbon steel. They are also available with hot dip galvanised steel. The anchor must always be used with a ribbed reinforcing steel, grade FeE500.
The table below indicates the diameter (mm) and the total length (mm) of the ribbed reinforcing steel to be used according to the concrete strength fc.
| Category | Reference | MWL* | A | B | C | D | L |
|---|---|---|---|---|---|---|---|
| 2T5 | 7001007090 | 0T7 | 20 | 14 | 30 | 5 | 90 |
| 2T5 | 7001014090 | 1T4 | 20 | 14 | 30 | 6 | 90 |
| 2T5 | 7001020090 | 2T | 20 | 14 | 30 | 8 | 90 |
| 2T5 | 7001025090 | 2T5 | 20 | 14 | 30 | 10 | 90 |
| Category | Reference | MWL* | A | B | C | D | L |
|---|---|---|---|---|---|---|---|
| 5T | 7001030120 | 3T | 22 | 18 | 40 | 10 | 120 |
| 5T | 7001040120 | 4T | 22 | 18 | 40 | 12 | 120 |
| 5T | 7001050120 | 5T | 22 | 18 | 40 | 15 | 120 |
| Category | Reference | MWL* | A | B | C | D | L |
|---|---|---|---|---|---|---|---|
| 10T | 7001053160 | 5T3 | 31 | 26 | 60 | 12 | 160 |
| 10T | 7001075160 | 7T5 | 31 | 26 | 60 | 16 | 160 |
| 10T | 7001100160 | 10T | 31 | 26 | 60 | 20 | 160 |
| Béton fc | Catégorie 2T5 | Catégorie 5T | Catégorie 10T | Cat. 26T | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0T7 | 1T4 | 2T | 2T5 | 3T | 4T | 5T | 5T3 | 7T5 | 10T | 14T | |
| 15 MPa | Ø8 | Ø10 | Ø12 | Ø12 | Ø14 | Ø16 | Ø16 | Ø20 | Ø20 | Ø25 | Ø32 |
| 15 MPa | 400 | 650 | 800 | 1000 | 1000 | 1200 | 1500 | 1250 | 1750 | 1850 | 2350 |
| 15 MPa | Ø8 | Ø10 | Ø12 | Ø12 | Ø14 | Ø16 | Ø16 | Ø20 | Ø20 | Ø25 | Ø32 |
| 15 MPa | 320 | 520 | 640 | 800 | 800 | 960 | 1200 | 1000 | 1400 | 1480 | 1880 |
| 15 MPa | Ø8 | Ø10 | Ø12 | Ø12 | Ø14 | Ø16 | Ø16 | Ø20 | Ø20 | Ø25 | Ø32 |
| 15 MPa | 260 | 425 | 520 | 650 | 650 | 780 | 975 | 815 | 1140 | 1200 | 1530 |
Minimum center distance, edge distance for two hole anchor
| Category | MWL* | Length [mm] | Minimum center distance E1 [mm] | Minimum thickness 2 x E2 [mm] |
|---|---|---|---|---|
| 2T5 | 0T7 | 90 | 500 | 70 |
| 2T5 | 1T4 | 90 | 500 | 80 |
| 2T5 | 2T | 90 | 600 | 90 |
| 2T5 | 2T5 | 90 | 600 | 100 |
| Category | MWL* | Length [mm] | Minimum center distance E1 [mm] | Minimum thickness 2 x E2 [mm] |
|---|---|---|---|---|
| 5T | 3T | 120 | 650 | 100 |
| 5T | 4T | 120 | 700 | 110 |
| 5T | 5T | 120 | 750 | 120 |